EPDM Roofing System
What is EPDM Roofing?
by Roof101 – Ethylene Propylene Diene Monomer, or simply, EPDM roofing, is an excellent material for low slope roofing applications. EPDM roofing is a synthetic rubber that acts as a roofing membrane special for flat roofs. The most popular kind of EPDM roofing is the firestone EPDM roof system, which is based on a high performance synthetic rubber compound, providing exceptional weathering characteristics. The EPDM roofing membrane is versatile and allows for many installation options.
Characteristics of the EPDM Roof System
Developed in America in the 1960’s, EPDM roofing is designed to exhibit superior flexibility, high strength, and outstanding weathering in practically all climates. EPDM roofing withstands temperatures ranging from -45 to 100 degrees Celsius, and displays no signs of ageing. The EPDM roof will not crack, split, or peel, and is completely resistant to atmospheric pollution. EPDM roofing is also environmentally friendly, and is unaffected by UV light and ozone. The elasticity of EPDM roofing allows it to elongate to over 300% to accommodate temperature cycling and building movements. An EPDM roof system has a life expectancy of about 20 years, during which next to no maintenance is required.
An EPDM Flat Roof
EPDM roofing comes in all sizes and can be installed in one piece, eliminating the problems associated with parting joints that cause many roof leaks and other common problems associated with flat roofs.
EPDM Roof Repair and Installation
Because EPDM roofing can be installed in one piece, its installation requires minimal seaming, and it is therefore simple and quick. Our expert roofers offer EPDM roofing installation services for all kinds of low slope and flat roof applications. Additionally, EPDM roofing has a low life-cycle cost, as it requires little maintenance. In the case that your EPDM roof is not functioning properly, we also offer EPDM roof repair services at all hours of the day or night. .
by Roof101
Watch this video about flat roof contractor
ALL CONSTRUCTION & DEVELOPERS, INC. GENERAL CONTRACTORS & ROOFING CONTRACTORS COMMERCIAL-RESIDENTIAL AND INDUSTRIAL FLORIDA-USA LICENSED AND INSURED www.allcontructiondevelopersinc.com www.allconstrudevelop.com August 12, 2009 Attention: OWNERS OR PROPERTY MANAGER ALL CONSTRUCTION & DEVELOPERS INC offers solutions for ALL your buildings needs. We will like to anticipate that ALL CONSTRUCTION is a family owned and operated company fully licensed and insured. You can be sure that we stand … Please help to answer the question about flat roof contractorNational Home Protection Insurance-Like A Scandal….What Should I Do???
I bought a house in May, talked to this manager, and he said I can file claims as soon as it's been activated. So the house I bought started to show problems like water leaks from the sink, so I called in, and they just say that "we don't fix anything that's bad, it has to be in good condition when you purchased the insurance" Then, on a rainning day, I found out that the roof actually is leaking water!! I called NHP because I did add the roof coverage when I purchase the insurance. I was about to cancel the policy(30 days money back guarantee), but the representative assures me that they will help fix the roof. So I was waiting for a contractor to come, but they never show up. When I call back (which is after the 30 days money back), they just told me "we don't do flat roof, which is the one you have!" How come no body ask me what types of roof we have before?" Now they want to charge me $350 for cancellation fee. The manager is not picking up the phone. What should I do?
About Author
Roof101 – provides roof repairs, roofing contractors, roofers, roofing services and natural slate, asphalt shingle, skylights, wood shake flat, metal roofing materials and roof tiles installation.
Related EPDM Roofing System:
- Rubber Membrane Roofing Solutions
- Innovative Membrane Roofing
- Rubber Roofs – Know the Fact
- Pick a Professional Roofer
- Asphalt Built Up for Flat Roofs
- Protect Your building with the Best Roofing
January 16th, 2010 | by roofing contractor |
By thegurlupstairs on Jan 16, 2010
Make sure it's in writing as to how they'll charge if water damaged sheeting is found, ie, time and materials, or will you supply the material and they repair. They won't know if there is damage until the roof is exposed.
Absolutely ask for references.
Check the BBB.
Don't hesitate to get more than one estimate.
Find out what kind of roofing material they plan to install…is it good quality or some cheapy stuff? That info should be included in the contract and can be verified at your local lumber yard.
How will the roof be loaded? Is a truck with a boom bringing it in? If so, how will the contractor ensure that your yard won't be hammered.
Who will be responsible for getting rid of the debris? Easier for them to do it…just get it in writing!
Ask that it be in writing that they "sweep" the yard (with a magnet) to get rid of any nails that fall to the ground. Even if they tarp the area, nails bounce
As far as meeting with the foreman, it might not be a bad idea. Good to know beforehand if you'll be able to communicate with him.
Best to you!
By Trey on Jan 16, 2010
It depends entirely on how strong the addition was made. If the roof is just 2×4 studs instead of 2×6 or greater, you have a good chance of problems. And if the waterproofing of the flat surface may break if you try to use it to walk on a lot in all kinds of weather and poke through with chair legs, etc.
The usual solution if the strength is there is to build the "patio" almost like you were making a deck near the ground: a strong sill atfached to the house and pads to rest on the roof and spread the force. Then the waterproofing of the addition stays intact and the deck can be level even if the roof has some slope for drainage.
If the floor of the house is very close to the level of roof, then there isn't really space to do that above. I would suggest getting someone to design it or ask for estimates based on a design being described to you and see how much trouble they think it will be.
By starlight on Jan 17, 2010
Definitely a rubber roof requires a great deal let maintenance and will last 15 to 20 years. This will be a true water proof roof system. Paper and tar is old method and will last 7 to 10 years before needing replaced. UV rays effect both but tar faster. Long term Rubber. Short term is moving in 5 years paper and tar.
By bellshouse1 on Jan 17, 2010
You need to check with your local Registrar of Contractors to see if there are any open or previous infraction by the builder. You will also be able to see how long the builder have been in business for (the longer the better). When comparing estimates, you need to make sure you are comparing apples to apples. A $20k spread is huge for a small project so somehow, one of the bids are missing services, whether it is demolition, hauling fees, materials to match existing, etc. If you're putting concrete tiles on the new gable roof, does it happen over a large expanse of windows/sliding door? Any of those builders include additional support on the header and foundation due to the increased load?
Just compare the differences in terms of included scope of work from each builder. By doing so, it may give you a better understanding of the price discrepancies.
By mealking on Jan 18, 2010
A metal roof is not a good idea. Ponding water will leak through the seams even if they are soldered because expansion and contraction will open up the seams. Ponding water will also cause the steel roof to rust prematurely.
A better option is a rubber membrane roof. Warranties as long as 40 years are available. A reputable roofing contractor will make quick work of the roof job and be around for any problems that may develop … in other words, they will be around to take care of any warranty problems.
Good luck with your roofing project.
By arjzv on Jan 20, 2010
You can do one of two things. Either ask a competitor to come inspect the roof and give you an itemized list of what's wrong with it *just tell them what happened and that you are looking for someone who can show you what's wrong and what needs repaired* or you can contact your insurance company who can set you up with someone who can check it for code. Once you get the documentation showing the lack of work done you can put in writing your complaint and demand it be redone. If they refuse, you have it in writing that you are unhappy with the product and also paperwork showing what damage is done. Take pictures! That way if they DO try to sue you for the money you can have that on your side. They won't get a DIME if you're in the right.
Do NOT pay until all the above has taken place or they can claim you damaged it etc. you wouldn't have paid if you weren't satisfied etc. and you won't get it fixed by them.