How To Install A Ceiling Fan All By Yourself

Do you have room that might use a ceiling fan? The installation of a ceiling fan is as straightforward as switching your current light fixture. Virtually all of the cabling you need is already around so the only thing is to change the current workbox with one that is developed for the weight of a ceiling fan. It can be very deadly if you do not exchange your current workbox to something that can take on the additional weight of the ceiling fan. Before you do anything, read the manuals for your fan very carefully and make sure you have the essential tools.

By examining a home or garden posting, it not only shows that you are considering upgrading or enhancing the space you live in, but leads a person to believe that you might have pride of ownership or maybe even pride of rentership.– which would be a landlord’s dream of course. A doable and probable place in almost any home that gets unnoticed or passed over by many home and garden aficionados is that of the attic or basement. Because they are often cold and damp or hot and dusty at present, doesn’t mean you can’t turn those conditions around and claim the areas for high functioning living spaces. A good kick off point to help get the ball moving is almost always to check out some ideas for a basement remodel. Another possibility of why those spaces might be passed by is because of someone combating mobility difficulties. It could be there is an elderly person or physically challenged person in the residence. The solution to that is to just do a quick search on electric wheelchair lifts and you can expect to see hundreds of alternatives and work arounds. All it requires is a will as well as creativity to improve the living area at your disposal indoors as well as out.

Should you decide to setup the fan at a cathedral type ceiling, you very well may need to get parts to extend the fan lower. Whenever you have all the stuff prepared, the foremost thing you ought to do is make sure that the breaker is turned off so no power goes to the light fixture. Anytime you remove the light fixture, examine to see if the existing workbox can cope with the increased weight. On most occasions, the workbox is not going to be able to take on the extra weight so you may need further support. You could do this really easily if you are able to gain access to the light fixture from the attic.

All that’s necessary to do, is nail a 2×4 inside the ceiling rafters, so it touches the top of the workbox. Check the 2×4 is anchored in its place, and then attach the box to the wood. If you do it the right way, the fan should be well supported by the 2×4. If you are not able to do it from the attic space or you have basically no attic, you will have to add a cross bracing in your ceiling. Performing this is more of a challenge and may not be as secure as using a 2×4 but it is the most suitable you can do if you dont get access to the attic.

Once you have put together the fan properly, you are now ready to hang your fan. The difficult part is holding the fan, while hooking up the wiring. It depends upon the type of fan you have, quite a few come with a bracket with a J hook while others have a clinging frame. Many fans employ a chain to master the speed of the fan while the wall switch turns the device on or off. If you also put in a light kit with the fan, both can be controlled by a wall switch or chain.

Next, just follow the wiring directions, usually as simple as connecting the two black wires, both white wires, and the two ground wires. Once you have finished building the fan and wires, the last step is to attach the fan blades. Immediately after you attach the blades, the only thing left is to turn the  breaker  back on to  find out  if you did  it  right.