Metal Roofs- An Attractive Option
The roof of your house is probably one aspect that draws attention to your house. Roofs have come a long way with respect to popularity, all thanks to the man made inventions. Roofing companies are now witnessing a considerable increase in the demand for metal roofs. The reason is pretty simple; customers are soon waking up to the benefits that roofs have to offer making roofs an attractive option for buyers who intend to install new roofs or even re-roofing for that matter. There are several factors that should be taken into consideration while opting for metal roofs. Some of these factors would include considerations such as the customer’s budget, sturdiness and the desired appearance of the roof.
In the past, when someone talked about metal roofs, the only image that came to mind was that of the inexpensive and low quality tin roofs. However, times have changed and so have the roof manufacturers. These modern roofs are much more attractive and purposeful than their predecessors. One of the best things about these roofs is that they are completely enhanced by modern day technology. The advantages of metal roofs are many. The most visible fact in this respect would be that roofs are far better than other conventional roofing materials used for the purpose. Some of them are given below:
Life expectancy: A metal roof that has been installed properly has the ability to last as long as your house, which could may as well be a decade or two at the least. There would be no problems with respect to water seepage through the roofs or anything of that sort. When it comes to the forces of nature, roofs have the capability of withstanding them all; winds, heavy rains, snow fall, etc. Another advantage of roofs is that the roof manufacturers offer a warranty with the products for nearly five decades.
Cost: One of the best things about metal roofs compared to other types of roofs is the cost of metal roofs per square. This makes the metal roofs an attractive option.
Easy installation: Metal roofs are probably the best roofing materials that can be installed without any hassles. That’s because roofs usually come in the forms of sheets and shingles. A professional roofing contractor and his experienced laborers can complete the installation work pretty fast. If you want the installation process to be easy, what you can do is purchase single metal shingles. These may make the process seem much easy, but in reality the process tends to get a bit time consuming.
Natural resistance: It goes without saying that roofs are naturally resistant to fire. All thanks to the non-combustible nature of roofs, they are accredited according to their classes. For example, a roof of class ‘A’ is more resistant to fire than its class ‘B’ counterpart. Another advantage of these roofs is that since they reflect the rays of the sun directly, you can save a lot with respect to your power bills by keeping your home cool during the summer months.
Watch this video about flat roof contractor
ALL CONSTRUCTION & DEVELOPERS, INC. GENERAL CONTRACTORS & ROOFING CONTRACTORS COMMERCIAL-RESIDENTIAL AND INDUSTRIAL FLORIDA-USA LICENSED AND INSURED www.allcontructiondevelopersinc.com www.allconstrudevelop.com JAN, 22, 2009 Attention: OWNERS OR PROPERTY MANAGER ALL CONSTRUCTION & DEVELOPERS INC offers solutions for ALL your buildings needs. We will like to anticipate that ALL CONSTRUCTION is a family owned and operated company fully licensed and insured. You can be sure that we stand behind … Please help to answer the question about flat roof contractorVinyl siding over wood siding vapor barrier fiber board insulation?
Confused here. I live in northwestern PA, about 10 miles from Lake Erie. I have wood siding on an old house that has the paint badly peeling off. I'm going to put vinyl siding over this old wood siding. I've had different answers from different people about insulation and vapor barriers. The walls are not insulated. So I have old peeling paint on wood siding over uninsulated walls.
At some point I plan on insulating those walls. So a contractor I used for my roof suggested using celotex fiber board over the wood siding prior to putting on the vinyl. This would also help make the wall flat for putting on the vinyl as well as insulate the house. However, it's not waterproof is that going to cause a vapor situation which gets absorbed into the fiber board?
A neighbor also has vinyl over his old wood siding, however he just has a foam vapor barrier.
Yet another has said I don't need anything and that the wood siding is already insulat, just put up the siding.
Correct answer?
About Author
Classic Metal Roofs LCC offers Metal Roofing and Flat Roofing in Southern New England including Massachusetts, Rhode Island, Connecticut, and Southern New Hampshire. Want to save big on your energy cost? Read about energy cost at our website http://www.classicmetalroofs.com.
Related Metal Roofs- An Attractive Option:
- Are You Considering a Metal Roofing System
- Getting The Best Deal On Your Metal Roofing
- An Easier And Less Expensive Option
- Take Another Look At Metal Roofing
- Debunking Common Beliefs About Metal Roofs
- Innovative Membrane Roofing
March 4th, 2010 | by roofing contractor |
By thegurlupstairs on Mar 4, 2010
Make sure it's in writing as to how they'll charge if water damaged sheeting is found, ie, time and materials, or will you supply the material and they repair. They won't know if there is damage until the roof is exposed.
Absolutely ask for references.
Check the BBB.
Don't hesitate to get more than one estimate.
Find out what kind of roofing material they plan to install…is it good quality or some cheapy stuff? That info should be included in the contract and can be verified at your local lumber yard.
How will the roof be loaded? Is a truck with a boom bringing it in? If so, how will the contractor ensure that your yard won't be hammered.
Who will be responsible for getting rid of the debris? Easier for them to do it…just get it in writing!
Ask that it be in writing that they "sweep" the yard (with a magnet) to get rid of any nails that fall to the ground. Even if they tarp the area, nails bounce
As far as meeting with the foreman, it might not be a bad idea. Good to know beforehand if you'll be able to communicate with him.
Best to you!
By mealking on Mar 4, 2010
A metal roof is not a good idea. Ponding water will leak through the seams even if they are soldered because expansion and contraction will open up the seams. Ponding water will also cause the steel roof to rust prematurely.
A better option is a rubber membrane roof. Warranties as long as 40 years are available. A reputable roofing contractor will make quick work of the roof job and be around for any problems that may develop … in other words, they will be around to take care of any warranty problems.
Good luck with your roofing project.
By Trey on Mar 4, 2010
It depends entirely on how strong the addition was made. If the roof is just 2×4 studs instead of 2×6 or greater, you have a good chance of problems. And if the waterproofing of the flat surface may break if you try to use it to walk on a lot in all kinds of weather and poke through with chair legs, etc.
The usual solution if the strength is there is to build the "patio" almost like you were making a deck near the ground: a strong sill atfached to the house and pads to rest on the roof and spread the force. Then the waterproofing of the addition stays intact and the deck can be level even if the roof has some slope for drainage.
If the floor of the house is very close to the level of roof, then there isn't really space to do that above. I would suggest getting someone to design it or ask for estimates based on a design being described to you and see how much trouble they think it will be.
By bellshouse1 on Mar 6, 2010
You need to check with your local Registrar of Contractors to see if there are any open or previous infraction by the builder. You will also be able to see how long the builder have been in business for (the longer the better). When comparing estimates, you need to make sure you are comparing apples to apples. A $20k spread is huge for a small project so somehow, one of the bids are missing services, whether it is demolition, hauling fees, materials to match existing, etc. If you're putting concrete tiles on the new gable roof, does it happen over a large expanse of windows/sliding door? Any of those builders include additional support on the header and foundation due to the increased load?
Just compare the differences in terms of included scope of work from each builder. By doing so, it may give you a better understanding of the price discrepancies.
By starlight on Mar 6, 2010
Definitely a rubber roof requires a great deal let maintenance and will last 15 to 20 years. This will be a true water proof roof system. Paper and tar is old method and will last 7 to 10 years before needing replaced. UV rays effect both but tar faster. Long term Rubber. Short term is moving in 5 years paper and tar.
By arjzv on Mar 7, 2010
You can do one of two things. Either ask a competitor to come inspect the roof and give you an itemized list of what's wrong with it *just tell them what happened and that you are looking for someone who can show you what's wrong and what needs repaired* or you can contact your insurance company who can set you up with someone who can check it for code. Once you get the documentation showing the lack of work done you can put in writing your complaint and demand it be redone. If they refuse, you have it in writing that you are unhappy with the product and also paperwork showing what damage is done. Take pictures! That way if they DO try to sue you for the money you can have that on your side. They won't get a DIME if you're in the right.
Do NOT pay until all the above has taken place or they can claim you damaged it etc. you wouldn't have paid if you weren't satisfied etc. and you won't get it fixed by them.