Rubber Membrane Roofing Solutions
Rubber Membrane Roofing Constituents
by Roof101 – Sometimes called synthetic or thermoset rubber, rubber membrane roofing is made of large flat pieces of synthetic rubber materials that are welded together at the seams to form a continuous membrane. The final thickness of rubber membrane roofing is usually about 0.75-1.5 millimeters, and it is highly suited to low slope and flat roofing surfaces. Some of the other materials integrated into rubber membrane roofing include ECR, CSPE, and CR.
The Benefits of Rubber Membrane Roofing
Rubber membrane roofing is UV resistant and therefore does not require an additional layer of surfacing such as tar or gravel, as with asphalt built up and tar and gravel roofs. It also makes them significantly lighter, which minimizes the effort required to install or replace a flat roof rubber. Furthermore, rubber membrane roofing can be applied in lengths of up to 50 feet, meaning that not only can many applications be covered with one single piece of rubber membrane roofing, but the amount of seams and joints is minimized heavily in those that cannot. The minimal seams and joints eliminate many problems associated with leaks and penetrations, and therefore the overall maintenance of a flat roof. EPDM and CSPE are the best performing rubber membrane roofing compounds, as their seams can actually be welded together.
Servicing Rubber Membrane Roofs
Rubber membrane roofs require periodic inspections, usually once a year, for the purpose of ensuring that no leaks or penetrations have developed. When detected early, they are easily stopped and treated. It will also ensure that your rubber membrane roof is functioning properly and living its full life span (which is highly dependent upon the level of attention it receives). Our rubber membrane roofing experts can offer you quality inspection, repair, and maintenance services for both residential and commercial buildings, and provide your flat roof rubber with the professional care it requires.
by Roof101
Watch this video about flat roof contractor
ALL CONSTRUCTION & DEVELOPERS, INC. GENERAL CONTRACTORS & ROOFING CONTRACTORS COMMERCIAL-RESIDENTIAL AND INDUSTRIAL FLORIDA-USA LICENSED AND INSURED www.allcontructiondevelopersinc.com www.allconstrudevelop.com SEP, 11, 2009 Attention: OWNERS OR PROPERTY MANAGER ALL CONSTRUCTION & DEVELOPERS INC offers solutions for ALL your buildings needs. We will like to anticipate that ALL CONSTRUCTION is a family owned and operated company fully licensed and insured. You can be sure that we stand behind … Please help to answer the question about flat roof contractorNational Home Protection Insurance-Like A Scandal….What Should I Do???
I bought a house in May, talked to this manager, and he said I can file claims as soon as it's been activated. So the house I bought started to show problems like water leaks from the sink, so I called in, and they just say that "we don't fix anything that's bad, it has to be in good condition when you purchased the insurance" Then, on a rainning day, I found out that the roof actually is leaking water!! I called NHP because I did add the roof coverage when I purchase the insurance. I was about to cancel the policy(30 days money back guarantee), but the representative assures me that they will help fix the roof. So I was waiting for a contractor to come, but they never show up. When I call back (which is after the 30 days money back), they just told me "we don't do flat roof, which is the one you have!" How come no body ask me what types of roof we have before?" Now they want to charge me $350 for cancellation fee. The manager is not picking up the phone. What should I do?
About Author
Roof101 – provides roof repairs, roofing contractors, roofers, roofing services and natural slate, asphalt shingle, skylights, wood shake flat, metal roofing materials and roof tiles installation.
Related Rubber Membrane Roofing Solutions:
- Innovative Membrane Roofing
- EPDM Roofing System
- Rubber Roofs – Know the Fact
- Protect Your building with the Best Roofing
- There Are Types Of Services Offered By Commercial And Tucson House Painting Contractors
- Many New Materials Options Available For Roofing
March 6th, 2010 | by roofing contractor |
By Trey on Mar 6, 2010
It depends entirely on how strong the addition was made. If the roof is just 2×4 studs instead of 2×6 or greater, you have a good chance of problems. And if the waterproofing of the flat surface may break if you try to use it to walk on a lot in all kinds of weather and poke through with chair legs, etc.
The usual solution if the strength is there is to build the "patio" almost like you were making a deck near the ground: a strong sill atfached to the house and pads to rest on the roof and spread the force. Then the waterproofing of the addition stays intact and the deck can be level even if the roof has some slope for drainage.
If the floor of the house is very close to the level of roof, then there isn't really space to do that above. I would suggest getting someone to design it or ask for estimates based on a design being described to you and see how much trouble they think it will be.
By thegurlupstairs on Mar 6, 2010
Make sure it's in writing as to how they'll charge if water damaged sheeting is found, ie, time and materials, or will you supply the material and they repair. They won't know if there is damage until the roof is exposed.
Absolutely ask for references.
Check the BBB.
Don't hesitate to get more than one estimate.
Find out what kind of roofing material they plan to install…is it good quality or some cheapy stuff? That info should be included in the contract and can be verified at your local lumber yard.
How will the roof be loaded? Is a truck with a boom bringing it in? If so, how will the contractor ensure that your yard won't be hammered.
Who will be responsible for getting rid of the debris? Easier for them to do it…just get it in writing!
Ask that it be in writing that they "sweep" the yard (with a magnet) to get rid of any nails that fall to the ground. Even if they tarp the area, nails bounce
As far as meeting with the foreman, it might not be a bad idea. Good to know beforehand if you'll be able to communicate with him.
Best to you!
By arjzv on Mar 6, 2010
You can do one of two things. Either ask a competitor to come inspect the roof and give you an itemized list of what's wrong with it *just tell them what happened and that you are looking for someone who can show you what's wrong and what needs repaired* or you can contact your insurance company who can set you up with someone who can check it for code. Once you get the documentation showing the lack of work done you can put in writing your complaint and demand it be redone. If they refuse, you have it in writing that you are unhappy with the product and also paperwork showing what damage is done. Take pictures! That way if they DO try to sue you for the money you can have that on your side. They won't get a DIME if you're in the right.
Do NOT pay until all the above has taken place or they can claim you damaged it etc. you wouldn't have paid if you weren't satisfied etc. and you won't get it fixed by them.
By bellshouse1 on Mar 7, 2010
You need to check with your local Registrar of Contractors to see if there are any open or previous infraction by the builder. You will also be able to see how long the builder have been in business for (the longer the better). When comparing estimates, you need to make sure you are comparing apples to apples. A $20k spread is huge for a small project so somehow, one of the bids are missing services, whether it is demolition, hauling fees, materials to match existing, etc. If you're putting concrete tiles on the new gable roof, does it happen over a large expanse of windows/sliding door? Any of those builders include additional support on the header and foundation due to the increased load?
Just compare the differences in terms of included scope of work from each builder. By doing so, it may give you a better understanding of the price discrepancies.
By mealking on Mar 8, 2010
A metal roof is not a good idea. Ponding water will leak through the seams even if they are soldered because expansion and contraction will open up the seams. Ponding water will also cause the steel roof to rust prematurely.
A better option is a rubber membrane roof. Warranties as long as 40 years are available. A reputable roofing contractor will make quick work of the roof job and be around for any problems that may develop … in other words, they will be around to take care of any warranty problems.
Good luck with your roofing project.
By starlight on Mar 9, 2010
Definitely a rubber roof requires a great deal let maintenance and will last 15 to 20 years. This will be a true water proof roof system. Paper and tar is old method and will last 7 to 10 years before needing replaced. UV rays effect both but tar faster. Long term Rubber. Short term is moving in 5 years paper and tar.