Simple Ways To Align Sensors On A Garage Door Opener

We cannot deny the fact that in any automatic garage doors there will always come a time that the sensors will have the tendency to become skewed as time goes by.Should this happen they must always be ready to face it. Adjusting a garage door sensor sometimes can be very uncomfortable to any homeowners however; with these simple techniques to follow it will make it easier for you to do the job.

One of the most important safety features of garage door is called the garage door sensor.At any given time the sensor can determine whatever obstruction is causing the door to operate improperly with the help of the sensor.The garage door sensor will automatically stop when the sensor intercepts anything along its path like children, pets or other things that the sensor picks up.

There are actually two sensors for each automatic garage door which are mounted above the ground for about six inches high.On any sides of the garage entry way we can usually see these two sensors. These function by transmitting infrared rays towards the electric “eye” of the sensor.

If there is any interrupting element in the beam a signal light in the sensor starts to blink.In order to prevent malfunctioning due to dust and dirt always wipe the eyes of the sensor with a clean cloth.However, if this will not take effect, try to realign the sensors.

There are times where we cannot avoid the sensors from being distorted just like any other electronic gadgets and this is usually the cause of the malfunctioning of garage door sensors.

Ways on How to Realign the Sensors

There are certain factors that can affect the misalignment of the car port door sensors.The strong vibration of the car port door and by accidentally hitting one end of the sensors with a shovel can be some accidental causes of the garage door sensors’ misalignment.Here are some ways for you to follow in realigning the sensors of your car port door.

1. You need to tie each of the sensors by making use of a long piece of string.

2. With the use of a leveling apparatus you check whether the string is balance. If not, make some necessary adjustments by trying to loosen one of the sensors and adjust the level of the string.

3. When you notice the bracket that is holding the sensor is somewhat bend then try to fix it by bending it back to make the sensor level.

4. After the sensor has come to a level start tightening the brackets to make sure they don’t become loose.

5. Check once more sensors if they are still level before you finally remove the string.

So after doing all the alignment of the sensors, your door should now be functioning very well.To test the door, try closing it and roll a ball while it is closing and see if the sensors are properly working or not. But if still the sensor does not work well, then maybe it would be proper to call for a professional mechanic to do the repair of your garage door opener sensor.

Toby Gibbon has been providing helpful information regarding Garage Door San Jose for many years. His expertise is the result of years of hands on experience in the garage door business. If you are having trouble with your door and would like some help he recommends giving Garage Door Repair San Jose a call.